These PYREX® drying tube adapters have one bulb and medium-sized TS joints. This tube is also a replacement part for organic chemistry kit no. 6949. Corning
These PYREX® reducing adapters have a TS outer joint at the top and a smaller TS inner joint at the bottom Corning
These PYREX® enlarging adapters have an outer TS joint at the top and a larger inner TS joint at the bottom. Corning
These PYREX® bushing adapters are fabricated with heavy walls for mechanical strength and are further strengthened by the heavy, uniform rim at the top which affords a serviceable finger grip. These adapters are shorter than the conventional type, thus allowing more compact and convenient assemblies. Useful for attaching thermometers with TS inner joints. Corning
The arms are approximately 105° apart. The upper end is equipped with an outer ST joint. The lower end is cut off at an angle and is used as a receiver adapter. Tube O.D. is 12mm. Corning
The arms are approximately 75° apart and both are equipped with inner TS joints of the same size. Often used as a stillhead adapter. Corning
With full length inner TS joints of same size. The connecting arm is approximately at a 75° angle from vertical and is 200mm long. Corning
The arms are approximately 105° apart. One end is equipped with an outer TS joint and the other end with an inner TS joint of the same size. Used as a receiver adapter. Corning
A receiver adapter with a vacuum connection. The vacuum tube O.D. is 10mm. Corning
With outer ST joint at the top and an innersealed through driptip joint at the bottom. Bent at a 105° angle. The serrated sidearm is 10mm O.D. Driptip at the bottom extends about 20mm below the lower end of the joint. Corning
These PYREX® 105° angle vacuum connecting adapters have a tubulation of 10mm O.D. for attaching to a vacuum pump or to inner and outer joints. Includes a drip-tip on the inner tube. These tubes are also replacement parts for organic chemistry kits Nos. 6949-E, 6949G-2 and 6949K. Corning
These PYREX® 60° angle distilling connecting adapters have a 24/40 outer joint at the upper end and inner 24/40 joints and on the sidearm and lower joints. This tube is also a replacement part for organic chemistry kit No. 6949. Corning
These PYREX® angle connecting adapters have a sidearm at an approximately 75° angle from the lower joint. The lower end and sidearm are equipped with inner TS joints, and the upper end with an outer TS joint. All joints on each tube are of the same size. Corning
The sidearm is at an angle approximately 120° from the lower joint. Both outer and inner joints are of the same size. Corning
With outer TS joints at the upper end and on the parallel sidearm. With inner TS joint at the lower end. All joints on each tube are of the same size. Corning
These PYREX® Claisen adapters have TS outer joints at the upper end and on the parallel sidearm and an inner TS joint at the lower end. All TS joints are the same size. Corning