In a single motion this colony counter marks, counts and confirms with a beep. The lightweight 42.5 gm (1.2oz) pen-style colony counter features a four-digit LED display that shows cumulative count. A selector switch allows for counting up or down to correct errors, or to check the count by counting backwards. Powered by a 3V battery. The long life felt-tip marker works on plastic or glass and is oil and water resistant, but removable with ethyl alcohol. Comes with red and black markers.[…] Bel-Art
This 20-slide unit is the standard for manual staining procedures. The removable glass slide rack has an open bottom to facilitate rapid immersion and drainage and eliminate carryover. The rack holds 10 single slides, 19 slides arranged alternately straight across and diagonally, or 20 slides back-to-back of regular size: 3" x 1" (75 x 25 mm), 3" x 1-1/2 " (75 x 38 mm) and 3" x 2" (75 x 51 mm) sizes. Manufactured from soda-lime glass. Approximate inside dimensions: 95 mm L x 76 mm W x 64 mm D. Wheaton
This Hellendahl-type dish can be used for staining or as a TLC developing chamber. It holds eight individual 3 x 1" (75 mm x 25 mm) slides or, if necessary, 16 slides back-to-back. Manufactured from soda-lime glass. Approximate inside dimensions: 76 mm L x 25 mm W x 75 mm D. The wide top is for convenient insertion and removal of the slides without disturbing the staining. Made of heavy, molded, clear glass with eight grooves. Wheaton
This unit holds ten 3" x 1" (75 mm x 25 mm) slides, which extend above the opening so you can manipulate them without using forceps. The screw cap is made of linerless white polypropylene that reduces solvent evaporation and spills during storage. The unit has a rectangular base and holds approximately 55mL. Manufactured from soda-lime glass. Approximate inside dimensions: 26 mm L x 26 mm W x 70 mm D. Wheaton
This popular staining jar has heavy glass walls and a broad base for increased stability. It holds five single 3" x 1" (75 mm x 25 mm) slides vertically, or 10 slides back to back, and requires low reagent volume (approximately 65 mL). Manufactured from soda-lime glass. Approximate inside dimensions: 26 mm L x 26 mm W x 90 mm D. Wheaton
Disposable plastic cassettes that hold tissue specimens during processing and embedding, as well as in storage. Molded from a special high-density polymer, these patented cassettes keep specimens safely submerged in liquid and are totally resistant to the chemical action of histological solvents. The efficient flow-through slots maximize fluid exchange and ensure proper drainage. The one-piece integral lid eliminates the need for separate steel lids. They can be opened and closed as often[…] Simport
Disposable plastic tissue cassettes are suitable for holding and identifying tissue samples in processing, embedding, and sectioning procedures. The cassettes fit securely in microtome chuck adapters. They are molded from a high density polymer that is totally resistant to the chemical action of histological solvents. These cassettes are designed to accept standard metal lids and will keep specimens in complete safety during processing. The slanted writing surface accepts markings easily,[…] Simport
Disposable plastic capsules with open mesh top and bottom that allow adequate fluid exchange during processing and infiltration. These capsules are suitable for holding tissue samples during processing. The lids have a frosted write-on area for sample identification and an open mesh area to facilitate fluid exchange. The whole surface of the base is also an open mesh. The lid snaps securely on the base, eliminating the risk of tissue loss during processing. Simport
BD Falcon™ Multiwell Plates are available two ways; tissue-culture treated polystyrene, flat bottom, with low-evaporation lid or untreated, nonpyrogenic. Treated plates employ vacuum-gas plasma tissue-culture treated polystyrene for uniform surface chemistry that promotes cell attachment, spreading and growth. Untreated plates are made of bacteriological grade polystyrene for a more hydrophobic growth surface and reduced cell attachment. Alphanumeric well identification and[…] BD Falcon
BD Falcon™ 4-well In Vitro Fertilization (IVF) Plates are made of nonembryotoxic, noncytotoxic, tissue-culture treated polystyrene. The virgin crystalline polystyrene is optically clear and tissue-culture treated for a more hydrophilic surface. Unique lid provides access to 2 wells at a time while 2 remain covered. Certified sterile, nonpyrogenic and non-embryotoxic. Certificates with test results are available. BD Falcon
Applications for these trays include serotyping, microcytotoxicity, cell cloning studies and DNA sequencing reactions. Freezer and incubator space is optimized with the low profile trays and the S-trays. Complete with lids and keyed tabs for proper orientation. Well spacing is standard and is compatible with most automated processing systems and microscopes. Large, raised alpha-numeric coordinates make well identification easy. The wells are inverted truncated cones with a working volume[…] Nalgene
The mini light box offers color corrected fluorescent viewing surface that is ideal for viewing slides, plates, mini-gels, Petri dishes or x-rays. Operates with 4 "C" batteries (not included) or with 6V DC adapter (optional). A removable counting grid is included. Dimensions: 158.8 x 136.5 x 44.5mm (6-1/4" x 5-3/8" x 1-3/4"). Weighs 255 gm (9 oz). Bel-Art
This freestanding magnifier allows enhanced viewing of slides, Petri dishes, multi-well plates, gels or text. The precision molded lens offers 1.75 magnification. The unique stand allows the magnifier to be placed over a variety of objects, including the Mini Light Box (L1092). Dimensions: lens 104.8 x 142.9mm (4 1/8"x5 5/8"), stand 171.8mm (6 3/4") high. Weighs 368 g (13 oz). Bel-Art
The essential tool for efficient master plate making, the EASI-GRID™ comprises a lightweight and durable case containing nine of the most popular templates for molecular biology, genetics and microbiology applications, plus a blank sheet for your own customized grid pattern. This unique product has been designed to hold any make of 90mm & 100mm diameter Petri dish firmly in its place above your chosen grid thus ensuring correct alignment of subsequent clones made from the master[…] Jencons Scientific