Clamps
| Items | Details | Price |
|---|---|---|
 Gas Cylinder Clamp(C4180) |
For supporting large compressed gas cylinders such as the "F" and "G" size oxygen cylinders. Cylinder strap is made of nylon webbing. Can be clamped to edge of table, desk or lab bench. | $42.68 |
 Round Jaw Buret Clamp(C4400) |
Stamped steel with zinc plating. Jaws rotate 360° and may be locked at any angle by checknut. Length 6⅜" (162 mm), jaw opening ⅜" (10 mm) - 1⅜" (35 mm). | $11.80 |
 Round Jaw Coated Buret Clamp(C4420) |
Clamp has Plastisol-coated jaws that rotate 360° and may be locked at any angle by checknut. Stamped steel with zinc plating. Length 6⅜" (162mm) jaw opening ⅜" (10mm) to 1⅜" (35mm). | $13.10 |
 Lincoln Type Double Buret Clamp(C4460) |
Fitting on 5/8" (16mm) support rods or smaller, this stamped steel clamp is zinc plated for corrosion resistance and has a steel thumbscrew. The clamp is 9" (229mm) long by 3" (76mm) wide with a center distance 7-1/4" (184mm) between burettes. The unit is designed for use with burettes from 6mm to 16mm in diameter. | $17.60 |
|
Clamp Holder with 5/16" Thumbscrew (C4500) |
The standard clamp holder is designed for use with rods up to ¾" (19mm). The adjustable version is designed for use with rods up to ⅝" (16mm) in diameter. Made from nickel-plated cast iron with 5/16" aluminum alloy thumbscrews. | $10.40 |
 Adjustable Clamp Holder(C4520) |
The adjustable clamp holder is designed for use with rods up to ½" (13mm). Made from cast iron with ¼" -20 aluminum alloy thumbscrews. Swivels and locks to any angle. | $14.50 |
 Coated Bunsen Round Jaw Extension Clamp(C4580) |
Plastic coated swivel jaws of stamped steel with a forged Steel handle; 3/8" (10mm) diameter. Jaw opening ⅜" (10mm) to 1-⅜" (35mm). Length 8" (203mm). | $13.50 |
 Stoddard Test Tube Clamp(C4600) |
Self-closing; rectangular Jaw; plain brass wire. Length 5" (127mm) with a jaw opening for up to 1" (25mm) diameter test tubes. | $2.40 |
|
Large Opening Stoddard Test Tube Clamp (C4605) |
Self-closing; rectangular Jaw; plain brass wire with finger grips. Length 6" (152mm) with a jaw opening for up to 1¼" (32mm) diameter test tubes. | $3.70 |
 Day's Pinchcock Clamp(C4710) |
Steel wire; nickel plated. Jaw opening for up to ⅜" (10mm) diameter tubing. Length 2⅝" (67mm). | $1.40 |
 Swinging Jaw Compressor Clamp(C4720) |
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and long life. | $2.78 |
 Open Jaw Compressor Clamp(C4730) |
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and long life. | $2.70 |
left right
-
Thermo Scientific Orion Versa Star Meter Promotion
Purchase a new Thermo Scientific Orion Versa Star meter and receive an additional module FREE!
-
Thermo Scientific® Orion™ ROSS™ pH Electrodes Promotion
Purchase a new ROSS™ pH electrode and receives two (2) bottles of ROSS™ storage solution and an Orion™ electrode storage sleeve for free.
-
Open Jaw Compressor Clamp
$2.70 -
Support Rings with Clamp
$9.50 -
Medium Utility Clamps w/ Round Jaws
$27.54
