Home » Keywords » Pumps

Pumps

Items Details Price
Filter/Vacuum PumpFilter/Vacuum Pump
(F2842) 		Polypropylene filter pump attaches to faucet for maximum free air pumping capacity of 11.5 liters per minute at a water flow rate of 6.5 liters per minute. Operates efficiently with water pressures as low as 7.5 psig (.517 bar) for minimum water consumption. Ultimate vacuum: 28-1/2 in. (723.9 mm) Hg. Supplied with integr... $13.17
KIMAX® Vacuum Filtering PumpKIMAX® Vacuum Filtering Pump
(F2843) 		KIMAX pump designed for minimum free air flow of 6.5 liters per minute with 40 lbs. of water pressure. With the same water pressure, a 500 mL filter flask is evacuated to the vapor pressure of water (approximately 29.3" of mercury vacuum) in approximately 1.5 minutes. Since water backs up into all pumps tested when opera... $84.87
VACU-GUARD™ Vacuum Filters. WhatmanVACU-GUARD™ Vacuum Filters. Whatman
(FM160) 		VACU-GUARD is a vacuum protection filter device designed to prevent fluid and aerosol contamination of vacuum pumps or aspiration suction systems and, at the same time, eliminate hazardous exhaust. Installed in the tubing line immediately before the vacuum source (vacuum pump, etc.), the device solves a long-standing pro... $157.55
VACU-GUARD™ 150 Gas Traps. WhatmanVACU-GUARD™ 150 Gas Traps. Whatman
(FM165) 		The VACU-GUARD line of filter devices combine the best of three classic chemical traps with proven vacuum protective (hydrophobic) PTFE membrane. The PTFE membrane is built into a pleated cartridge and is permanently fuse bonded inside the base of the capsule. These types of chemical traps have been recommended by Mennig... $216.17
Polyethylene Hand Pump/SiphonPolyethylene Hand Pump/Siphon
(P8530) 		The self contained Poly-Hand Pump works independently of air pressure. Requires no adapters and delivers by positive pressure on the down stroke of the piston. The pump will deliver against a 3.65-meter (12 ft.) head of water and empty a drum or carboy to within 3mm (1/8") of the bottom. Made entirely of polyethylene, it... $151.61
SyphonetteSyphonette
(P8531) 		The Scienceware® Syphonette is made from polypropylene and polyethylene and is particularly well suited to withdrawing liquids from narrow necked containers with a minimum opening of 19mm (3/4"). The inlet tube, made of rigid polypropylene, is 66cm (26") long but may be permanently shortened by cutting. Operated by squee... $46.12
Vacuum Aspirator PumpVacuum Aspirator Pump
(P8541) 		This is a high-density polyethylene aspirator pump that operates on water pressures above 11 psi (7584 N/m2). The integral check valve resists corrosive filtrates and fumes. A quick-disconnect hose fitting accepts 6.4mm to 9.5mm (1/4" to 3/8") I.D. tubing. The male thread faucet connection is 9.5mm (3/8") I.D. Maximum at... $13.24
FH10 Peristaltic Tubing PumpsFH10 Peristaltic Tubing Pumps
(P8555) 		Thermo Scientific FH10 peristaltic pumps—provided as complete pumping systems—are ideal where space is limited. Quality design in a small, compact package, these peristaltic pumps are provided complete with pump, motor, and control in a stackable steel housing. Low-maintenance design provides thousands of hou... $735.00
FH15 and FH30 Peristaltic Tubing PumpsFH15 and FH30 Peristaltic Tubing Pumps
(P8556) 		Thermo Scientific FH15 and FH30 peristaltic pumps—provided as complete pumping systems—are ideal where space is limited. Quality design in a small, compact package, these peristaltic pumps are provided complete with pump, motor, and control in a stackable steel housing. Low-maintenance design provides thousan... $770.00
Perimatic Premier Peristaltic Pump Dispenser. JenconsPerimatic Premier Peristaltic Pump Dispenser. Jencons
(P8560) 		The Perimatic Premier Peristaltic Pump Dispenser is designed for rapid but controlled dose filling of a variety of containers without splashing or frothing. The Perimatic Premier is a heavy duty, microprocessor controlled precision dispensing pump. The Premier achieves its high performance due to its precision rotor and ... $5,677.88
Perimatic GP Peristaltic Pump Dispenser. JenconsPerimatic GP Peristaltic Pump Dispenser. Jencons
(P8561) 		The Perimatic GP represents a lower cost alternative to the Premier model (P8560) yet still offers many of the Premier's attractive features. The Perimatic GP can also be used as a transfer pump in forward or reverse mode. Features include: Microprocessor calibration, Memory to store calibration values, volumes and set-u... $3,776.24
Perimatic Robotic XY Module. JenconsPerimatic Robotic XY Module. Jencons
(P8563) 		The Perimatic Robotic XY Module has been designed to automate the filling of a wide range of containers in conjunction with the Perimatic range of liquid dispensers. These containers can be filled in straight rows or honeycomb pattern. The system can be programmed to memorize up to 99 fill patterns. Features include: Mic... $12,094.29
Browse all Product Categories