Conductivity Meters

Replacement Parts for Oakton EcoTestr Pocket EC High and EC Low. ALL MODELS

Replacement Parts for Oakton EcoTestr Pocket EC High and EC Low.

(Sample Photo Displayed. Individual items may differ from the image shown)

WATCH VIDEO: Oakton Instruments EcoTestr

Replacement Parts for Oakton ECTestr 11+ Conductivity Tester. ALL MODELS

Replacement Parts for Oakton ECTestr 11+ Conductivity Tester.

(Sample Photo Displayed. Individual items may differ from the image shown)

Conductivity/pH Dissolved Solids Meters. Myron L

Myron L pDS Meters are compact, lightweight, self-contained conductivity/pH meters. They contain a built-in conductivity cell with a replaceable pH sensor. Models EP11/pH and M6/pH have dials calibrated in micromhos (equivalent to the metric microsiemens) and in pH units. They will quickly determine the conductivity and pH of almost any solution. Both are 3.4" x 4.5" x 4.0" (85 x 129 x 126mm) and weigh less than one pound (0.45 kg). pDS Meters are completely self-contained. The built-in conductivity cell is automatically temperature compensated from 50° to 160°F (10° to 71°C). Power is...

Three Range (ppm) Dissolved Solids Meters. Myron L

The model 532 three range DS Meter is a compact instrument which operates on the principal of electrical conductivity. It will quickly determine the conductivity or ppm/Total Dissolved Solids of almost any solution. These instruments convert the conductivity directly into parts per million (ppm) of Total Dissolved Solids. All are 3.4" x 4.5" x 4.0" (85 x 129 x 126mm) and weigh less than one pound (.45 kg). DS Meters are completely self-contained. The built-in cell is automatically temperature compensated from 50° to 160°F (10° to 71°C). Self-conditioning of the built-in electrodes occurs each...

Accessories for Myron L Meters

Model RE-10 (W3800-1) increases the conductivity/TDS range 10 times when inserted into the sample-filled cell cup. Not available for Model 512T10 (W3760-4). The Porta-Pak Carrying Case (W3800-2) can be used with all DS and pDS Meters. Foam-lined and molded of sturdy ABS plastic. No solutions/buffers included. The Porta-Kit is a sturdy foam-lined case with 2 oz. bottles of pH 4, 7 and 10 buffers and conductivity standard solution. For use with W3740 meters only. Order W3800-3 for Models M6/pH, T2/pH and T6/pH (W3740-1thru -3); W3800-4 for Model EP11/pH (W3740-4).

Control Company 4168 Traceable® Pure H2O Tester

Meets all lab certification requirements Specifically designed to test water from stills, demineralizers, deionizers, and reverse osmosis equipment. Meets all lab certification requirements for pure water analysis for CAP, ASTM, NCCLS, USP, and ACS. Single-purpose unit complies with all accreditation analysis requirements. Designed for labs obligated to maintain a periodic check of water purity. To assure accuracy, a Traceable® Certificate is provided to indicate instrument traceability to standards provided by NIST (National Institute of Standards and Technology) for the manufacturer’s...

Control Company 4360 Traceable® Expanded Range Conductivity Meter

Conductivity meter automatically selects the proper range and displays the exact answer with ease. Unit fulfills requirements for CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, ISO, and Federal/State regulations. Use this meter to check the purity of water from stills, deionizers, and reverse osmosis, to test laboratory glassware rinsing, to measure total dissolved solids, and to make solutions. Specifically designed to measure conductivity in water analysis, biology, chromatography, food, electronics, dairies, and PC board rinsing. Labs wanting to maintain...