The Electromantle Extraction Heaters offer a choice of three or six recesses. Individual built-in solid-state electronic controls enable easy regulation of each heater, while removing sparking associated with mechanical switching. Units include three 0.5"(12.7mm) diameter support rods. External surfaces are PTFE-coated and resistant to most chemical solutions. The robust construction permits continuous operation of the units as required by routine extraction tests. Element temperature range to 450°C. The coiled heating element is suspended within a thermal insulating cartridge to provide...Catalog No.: E1510-1 | E1510-2 | E1510-3 | E1510-4 | E1510-5 | E1510-6 | E1510-7 | E1510-8
Glas-Col's combination heating mantles have always been the mantles of choice for repetitive extracting, refluxing, and distilling procedures in labs of the food, textile fiber, water and waste-water, petroleum, and many other industries. The ideal mantle for Kjeldahl, Soxhlet, and other extraction procedures. Lower profile for space-saving convenience. Revolutionary heating element container system makes replacing burned-out elements a simple, five minute task. Element containers act as spill containment chambers to capture chemicals from spillage or boil-over. Clear anodized aluminum...Catalog No.: H1521-1 | H1521-2 | H1521-4 | H1521-5 | H1521-6 | H1521-7 | H1521-8 | H1521-9 | H1521-10 | H1521-11 | H1521-12 | H1521-13 | H1521-14 | H1521-15 | H1521-20 | H1521-21 | H1521-22 | H1521-24 | H1521-25 | H1521-26 | H1521-27 | H1521-28
Glas-Col's combination mantles have always been the mantles of choice for repetitive extracting, refluxing, and distilling procedures in labs of the food, textile fiber, water and waste-water, petroleum, and many other industries. Glas-Col's latest version offers safety and convenience never before available in a multi-place heating mantle. Each six-place Combo is furnished with six spring-type glassware clamps. The clamps hold glassware from 1 5/8" - 2" in diameter. The clamps attach to one of the horizontal support rod (included).
Two Series RL control...
The Goldfisch Fat Extractor from Labconco is used to determine fat and oil content in samples. Listed in AOAC methods. Frame is constructed of anodized aluminum. Features: six 100-watt, spring-loaded heater elements operated by 3 infinite-control knobs with variable heat input from 20-100% capacity: red pilot light: six metal condensers with Type 304 stainless steel heads and six automatic pressure-release valves: on/off switch: 3/8" IPS control valve for connection to cold water supply: 3/4" IPS water outlet for connection to an open drain of at least 3/4" IPS: and 6-foot, 3-wire cord with...Catalog No.: N1215-1