Flash Point Testers
TAG Closed Cup Flash Point Tester. Koehler
The K14600 Tag Closed Cup Flash Testers determine flash points of liquid products by the Tag Closed Cup method. Use for flash point determinations of liquids with a viscosity of below 5.5 centistokes (cSt) at 104°F (40°C) or below 9.5cSt at 77°F (25°C), and a flash point below 200°F (93°C) except cut-back asphalts, those liquids which tend to form a surface film under test conditions and materials which contain suspended solids. Features stepless variable heat control with reference dial for accurate repeat setting of temperature rate of rise per specifications. Also available with ga
Catalog No.: P3300-1 | P3300-2 | P3300-3 | P3300-5 | P3300-6
Cleveland Open Cup Flash Tester. Koehler
The K13900 Cleveland Open-Cup Flash Tester determines flash and fire points by the Cleveland Open-Cup method. For flash and fire points of all petroleum products, except fuel oils and those having an open cup flash below 79°C (175°F). Consists of test flame applicator, brass test cup, thermometer support, heating plate and electric heater. Applicator is precisely aligned per specifications and pivots for test flame application at specified temperature intervals. Hinged thermometer support rises to facilitate placement and removal of test cup. Adjust flame size using built-in needle valve and
Catalog No.: P3275-1 | P3275-2 | P3275-3
TAG Open Cup Flash Point Tester. Koehler
Determines Tag Open-Cup flash and fire points of liquids at temperatures of up to 325°F (163°C) and flash points of cutback asphalts at temperatures of less than 200°F (93°C). Includes sample test cup, plated brass liquid bath with constant level overflow, pivoting ignition taper with pilot light and reference bead, pivoting thermometer holder, heater and cast aluminum base. Electrically heated model is equipped with stepless variable heat control for accurate control of temperature rate of rise per specifications. Also available with gas or burner. Conforms to: ASTM D1310, D3143. Shipping
Catalog No.: P3320-1 | P3320-2 | P3320-3 | P3320-11 | P3320-12
Pensky-Martens Closed Cup Flash Point Tester. Koehler
The K16200 Pensky-Martens Closed Cup Flash Tester determines flash points of a wide range of products by a closed cup method with slow speed stirring of the sample. Extensively used in shipping and safety regulations for detection of contamination by volatile and flammable materials in fuel oils and lubricating oils, and for characterization of hazardous waste samples. Smooth operating cover mechanism slides shutter open and applies test flame at the turn of a knob. Cover fits over brass test cup and includes pilot flame, test flame reference bead, and plated brass thermometer ferrule. Electri
Catalog No.: P3255-1 | P3255-1E | P3255-1G | P3255-2 | P3255-3 | P3255-4