Description:
Depending on the deionization system, certain accessories are available. These can be easily added to either new or existing systems to provide the benefits described. Digital Purity Monitor: Provides a direct reading of the resistivity of the water exiting the system. Temperature compensated to 25°C. Fits conveniently into B-pure, as well as any 1/2" (12.7 mm) NPTF opening. Provides a digital reading of actual water purity in megohm-cm, temperature compensated to 25°C. Pura®-Lite: Provides "Go/No Go" indication of water purity. Green light indicates acceptable water purity; red light indicates unacceptable purity. Easily fits into B-pure holder or any 1/2" (12.7 mm) NPTF connection. Various resistivity values to provide more flexibility in your individual water system. Low Pressure Pump Protector: If you are feeding a NANOpure® DIamond, E-pure or EASYpure® system from a pressurized feed line, it is to your advantage to ensure that the pump is fully protected with the use of the low-pressure pump protector. Interrupts power if pressurized feedwater line pressure falls below 5 psig (0.35kg/cm2). Includes 6' (1.8 meters) cord which plugs directly into NANOpure® DIamond, E-pure or EASYpure® II systems. Complete with 1/4" (6 mm) NPT "T" to install in your feed line. Low Water Level Pump Protector: If feeding from a storage reservoir, it is recommended that a low water pump protector be added to NANOpure® DIamond, E-pure or EASYpure® systems to ensure that the pump is protected in the event the reservoir does not have a sufficient quantity of water to satisfy the requirements of the system. Adaptable to most storage reservoirs, providing a 1/2" (12.7 mm) NPTF connection is available. Comes complete with 6' (1.8 meters) cord to attach directly to the NANOpure® DIamond, E-pure or EASYpure® systems. Flow Meters: Flow meters allow precise measurement and control flow of water through a B-pure system. They are installed in the inlet water line. The float type meters are complete with an adjustable flow valve. Inlet and outlet connections are 1/2" (12.7 mm) NPTF. * A flow meter cannot be used when a Recirculating/Distribution Pump is part of a water system.