WaterPro Reverse Osmosis Station. Labconco
WaterPro RO Station delivers RO purified water, ideal for laboratory applications such as reagent preparation and glassware rinsing. Its water may be used to supply the final rinses for laboratory glassware washers. The WaterPro RO may be used to pretreat tap water for ultimate purification by a polishing system. Constructed of epoxy-coated steel with Type 304 stainless steel front panel. Control panel includes ON/OFF switch; LED display; µS, TEMP, TIME DISP. and TANK FULL indicator lights; dispense switch for water delivery control from valve; mode switch for selecting LED display; and increase/decrease switch for setting dispensing time from 0 to 99.9 minutes. Depending on mode selected, LED displays actual water quality from 1 to 999 microsiemens, actual water temperature in degrees C or dispense time in minutes. Includes 1/4 hp motor/rotary vane booster pump; RO membrane back pressure relief valve preset to 150 psi; internal pressure gauge with range from 0 to 160 psi; automatic flush valve; air vent filter; tank check valve; mounting hardware; dispensing valve with hose barb fitting for 3/8" ID tubing; polyethylene, 17 liter storage tank with outlet port for 1/2" OD plastic tubing; and 8-foot, 3-wire cord. Bowls are constructed of white polypropylene. Bowls are included for one prefilter, one carbon filter and one reverse osmosis membrane (cartridges are not included). Full one year warranty is provided against defects in materials and workmanship.