Humidity Sponge™ Regenerable/Indicator. Control Company. COMBINED DISPLAY
Humidity Sponges™ meet all drying requirements. The latest in drying technology turns any container into a desiccator. Indicator bag particles show when moisture capacity has been reached. Humidity Sponges™ meet FDA (Food and Drug Administration) requirements for use in direct contact with food and drugs. Desiccant (sodium calcium aluminosilicate hydrate) is nontoxic and is a GRAS (Generally Recognized as Safe) material. It is ideal for storing food/pharmaceutical samples, electronics, PC boards, optics, chemicals, and equipment. Outer material is made of DuPont’s Tyvek™ breathable, high-density polyethylene. Zero-Dust bags are certified as Class M3.5 (formerly Class 100) clean room compatible. Drying capability depends on volume, temperature, and moisture. As a benchmark, one bag will maintain dry conditions in a container with a volume of two gallons (476 cubic inches/7800 cubic centimeters). Bags are guaranteed to retain 16% moisture by weight; typical results are 37% moisture absorption. Each bag measures 3 x 3 x 1/4 inches and weight is 3/8 ounce. Indicator Sponge has one side of clear film and one of white Tyvek*. It contains blues particles which turn pink when the desiccant has reached its moisture capacity and needs to be replaced. Indicator Humidity Sponge™ cannot be regenerated. Regenerable Sponge has white Tyvek™. on both sides and may be regenerated and reused continuously. Regeneration requires heating in an oven at 220°F (104°C). Included in each pack is a Relative Humidity Card which changes from blue to pink to show when bags need to be regenerated.
Humidity Sponge™ - Indicating