In-line Filters | General Laboratory Supply, Inc.

Quick Look

HEPA-CAP In-Line Filters. Whatman

HEPA-CAP is a disposable in-line filter device that will retain 99.97% of all particles greater than or equal to 0.3m. HEPA filter media is used throughout the scientific, research and industrial environments to provide clean/sterile air and gases. Two sizes of these devices are available: HEPA-CAP 36 with a 625 square centimeter filter area; and HEPA-CAP 75 with a 1300 square...

HEPA-CAP is a disposable in-line filter device that will retain 99.97% of all particles greater...

Catalog No: FM110-1 | FM110-2

Quick Look

Carbon Cap/HEPA Filter Devices. Whatman

Carbon Cap is a capsule filter that is filled with high-purity, high-efficiency, acid-washed, granular-activated carbon and a pleated HEPA filter. It is made specially to meet the requirements for continuous column percolation purification processes. Retains 99.97% of particles greater than 0.3 µm. Applications include: Water, chemical and reagent purification, removes noxious...

Carbon Cap is a capsule filter that is filled with high-purity, high-efficiency, acid-washed,...

Catalog No: FM100-1 | FM100-2

Quick Look

Polydisc AS Aqueous Solution Filters. Whatman

Whatman Polydisc 50 mm in-line disc filters are designed for larger volume sample filtration in the laboratory, at a pilot plant or in manufacturing. They are extremely versatile and cost effective. Sample volumes up to 1 liter can be filtered with one device. Polydisc devices can be used in conjunction with a syringe or connected in-line (6-10 mm ID hose) via stepped hose...

Whatman Polydisc 50 mm in-line disc filters are designed for larger volume sample filtration in the...

Catalog No: FM130-1 | FM130-2 |

Quick Look

Polydisc TF Reagent Filters. Whatman

Whatman Polydisc 50 mm in-line disc filters are designed for larger volume sample filtration in the laboratory, at a pilot plant or in manufacturing. They are extremely versatile and cost effective. Sample volumes up to 1 liter can be filtered with one device. Polydisc devices can be used in conjunction with a syringe or connected in-line (6-10 mm ID hose) via stepped hose...

Whatman Polydisc 50 mm in-line disc filters are designed for larger volume sample filtration in the...

Catalog No: FM145-1 | FM145-2 | FM145-3 | FM145-4

Quick Look

VACU-GUARD™ Vacuum Filters. Whatman

VACU-GUARD is a vacuum protection filter device designed to prevent fluid and aerosol contamination of vacuum pumps or aspiration suction systems and, at the same time, eliminate hazardous exhaust. Installed in the tubing line immediately before the vacuum source (vacuum pump, etc.), the device solves a long-standing problem with suction systems/vacuum pumps. Elimination of...

VACU-GUARD is a vacuum protection filter device designed to prevent fluid and aerosol contamination...

Catalog No: FM160-1 | FM160-2

Quick Look

Aqueous and Solvent In-Line Filter/Degassers. Whatman

The Aqueous IFD and Solvent IFD microfiltration devices are in-line filter/degassers. As the name implies, the Aqueous IFD provides pure filtration of aqueous based HPLC mobile phases while the Solvent IFD is used with organically based HPLC mobile phases. Specifically, the Aqueous IFD is designed to work with mobile phases containing at least 20% of the aqueous component. The...

The Aqueous IFD and Solvent IFD microfiltration devices are in-line filter/degassers. As the name...

Catalog No: FM200-1 | FM200-2 | FM200-3 | FM200-4 | FM200-5

Quick Look

HEPA-VENT In-Line Filters. Whatman

HEPA-VENT is a disposable in-line filter device that will retain 99.97% of all particles greater than or equal to 0.3m. HEPA filter media is used throughout the scientific, research and industrial environments to provide clean/sterile air and gases. The HEPA-VENT housing is 1.8 inches long by 2.1 inches and is constructed of polypropylene. The filter media is glass microfibre...

HEPA-VENT is a disposable in-line filter device that will retain 99.97% of all particles greater...

Catalog No: FM115