Supports/Racks

Photo of Eppendorf® Tube Racks
The Eppendorf Tube Rack is ideal for sample processing and the short- or medium-term storage of samples. The rack can be stored in a freezer and withstand temperatures as low as -80 °C. Each tube is properly spaced and elevated for easy access and convenient handling. Tube racks are available for 0.5 mL test tubes and 1.5 mL-2.0 mL test tubes. 24-place capacity. Numbered positions. Tube racks can be stacked even when fully loaded, and the unique swivel connectors interlock multiple racks in front-to-back and side-to-side configurations.
Photo of Troemner Talboys Double Buret Stands and Clamps

Stainless steel electro-polished finish or nickel-plated zinc Double Buret Clamp holds any size buret from micro to 100mL capacity. Simply compress scissor-like mechanism, insert buret and gently release to grip. Numbers and graduation on buret remain easy to read. For height adjustments, recompress mechanism and slide buret up or down and gently release. Clamp unit attaches to optional standard support rod with built-in reinforced hook connector. Adjusting nut faces forward for easy use. Stainless steel or aluminum support rod attaches to porcelain base.

Photo of Poxygrid® Petri Dish Carrying Racks
Petri dishes are easily dispensed one at a time from the bottom of the stack with these epoxy coated steel wire racks. Each channel holds twenty 100mm x 20mm (nominal size) plastic Petri dishes (4" x 3/4") that are loaded at the top and dispensed at the bottom. The rack tilts toward the rear for convenient presentation of dishes. Not suitable for glass Petri dishes.
Photo of Poxygrid® Petri Dish Dispensing Racks
Petri dishes are easily dispensed one at a time from the bottom of the stack with these epoxy coated steel wire racks. Each channel holds twenty 100mm x 20mm (nominal size) plastic Petri dishes (4" x 3/4") that are loaded at the top and dispensed at the bottom. The rack tilts toward the rear for convenient presentation of dishes. Not suitable for glass Petri dishes.
Photo of Easyplate™ Petri Dish Racks
Increase workspace and efficiently transport Petri dishes with the Easyplate. The Easyplate eliminates a "balancing act" of Petri dishes and enables you to transport Petri dishes rapidly and orderly. Elastic holding devices keep the Petri dishes in place. Write-on labels are provided for critical sample identification. The Easyplate is manufactured from polycarbonate and is autoclavable. Available in two sizes: the 9" size holds (48) 100mm Petri Dishes and the 14" size holds (84) 100mm Petri Dishes.
Photo of Poxygrid Glove Dispensers
Keep disposable gloves handy with these welded steel wire racks. Select racks to hold one, two or three boxes of disposable gloves or boxes of wipes or tissues. Each box drops into an individual retaining compartment and lifts out easily for replacement. Retaining compartment internal dimensions: 12.7cm W x 9.5cm D (5" W x 3¾" D). All models are designed for mounting to a vertical surface. Durable blue epoxy coated racks are steam autoclavable at 121°C (250°F).
Photo of Hydrometer Rack
Protect fragile glass hydrometers by storing them in this 18-place polypropylene rack. The middle and top plates have 25mm (1") diameter holes. The bottom plate is 44mm (1¾") high and has wells tapering from 25mm to 9mm (1" to 3/8") to hold the hydrometer bulb. The base is 210 x 216mm (8¼" x 8½") for tip-proof stability. Overall height 251mm (9⅞") with handles. Steam autoclavable at 121°C (250° F).
Photo of Magic Touch™ Round Floating Rack for 15mL Conical Tubes. Bel-Art
Magic Touch™ floating rack holds 15mL conical tubes. Expanded Polymer Foam is flexible and holds tubes securely in place during use while allowing them to slide easily in and out when needed. Floats in water, dry ice/alcohol slurries and liquid nitrogen. Expanded polymer foam is chemical resistant, impervious to moisture and odors, and unbreakable under normal use conditions. The 30 place rack holds 15 mL conical or similar diameter tubes. Fits all Magic Touch Ice Buckets. 21.0cm (8 1/4") diamter x 1.6cm (5/8") thick
Photo of Magic Touch™ Rectangular Floating Rack for Microcentrifuge Tubes. Bel-Art
Magic Touch floating rack holds 1.5mL microcentrifuge tubes.  Expanded Polymer Foam is flexible and holds tubes securely in place during use while allowing them to slide easily in and out when needed. Floats in water, dry ice/alcohol slurries and liquid nitrogen. Expanded polymer foam is chemical resistant, impervious to moisture and odors, and unbreakable under normal use conditions. The 36 place rack holds 1.5 mL microcentrifuge or similar diameter tubes. Fits 4.0L Midi and 9.0L Maxi Magic Touch Lab Pans. Dimensions: 23.5 x 10.8 x 1.0cm thick (9 1/4" x 4 1/4" x 3/8").
Photo of Eppendorf® Pipette Holder and Pipette Stands
Enjoy an organized workplace with our rotating pipette stand. Pipettes attach to the stand by the handle, not the nose cone, which rules out potential cross-contamination from the stand to the pipettes. In addition to the Eppendorf Research® and Reference® pipettes, the stand can also hold all older models of Eppendorf® pipettes.
Photo of Orion™ Electrode Stand & Holder. Thermo Scientific
Thermo Orion™ Electrode Stand and Holder provides station for sample container and vertical adjustment of electrodes. Universal holder has 5 holes to accept ion-selective electrodes, gas sensing electrodes, reference and pH electrodes as well as temperature compensating probes. Gas sensing electrodes are supported at 20° angle, to avoid entrapment of air bubbles in sensing tip. PH4363-3, universal electrode holder, will fit support rods of 5/16” or 3/8“ (8 or 9.5 mm) diameter”.
Photo of Cuvette Racks
These racks support cells with a minimum of physical contact. Only the corners of the cuvettes touch the racks, greatly reducing the chance of damage to cells. The two tier racks accommodate 12 cuvettes of 10mm light path and will not scratch quartz cuvettes. Made of polypropylene, which is steam autoclavable at 121° C (250° F). 6 per case. S4360-2 features Stack Rack® Test Tube Rack interlocking end plates for extra security when stacking.
Photo of Poxygrid® Wire Test Tube Racks
Chemical and corrosion-resistant steel wire racks are coated with your choice of heat cured epoxy, vinyl, nylon, or they can be plated with zinc. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalies, will withstand a temperature range of -223°C (369°F) to +121°C (249.8°F), and can be autoclaved. Nylon is an excellent coating for use with petroleum products and can be used between 0° (32°F) and +70°C (158°F). Vinyl's temperature limits are -30°C (-22°F) to +70°C (158°F).
Photo of Ring Stand with Tripod Base
Bases are cast iron with black enamel finish. Rods are zinc plated steel and threaded to fit into the base.
Photo of Micro Sample Test Tube Racks
These polypropylene racks stack to conserve space, each holds 72 micro sample tubes in 6 x 12 rows. Steam autoclavable at 121° C (250° F).
Photo of Troemner Talboys Heavy-Duty Support Stands with Stainless Steel Rod

Troemner Talboys Heavy-Duty Support Stands are designed to accommodate vessels up to 12" (305mm) in diameter, to sit close to the support rod. Support rod is ideal for mounting stirring motors for heavy equipment. Each of the four corners rests on a rubber cushion. The cast iron base measures 16.5" (419mm) across x 12" (305mm) deep overall and has a black enamel finish.

(Sample Photo Displayed. Individual items may differ from the image shown.)

 

Photo of Stamped Steel Ring Stand with Rectangular Base
Base is stamped steel with a black enamel finish. Supplied with plated steel rod.
Photo of Ring Stand with Rectangular Base
Bases are black enameled iron with a rectangular shape. Rods are zinc plated steel and threaded to fit into the base.
Photo of Poxygrid® Half-Size Wire Test Tube Racks
Excellent space-savers for use in water baths, under fume hoods, and any place where space is limited. Epoxy coated and available in three colors: orange for biohazard warning, green and blue for general lab use.
Photo of No-Wire™ Autoclavable Test Tube Racks
A great alternative to wire racks, with price and space saving advantages over other plastic racks currently available. These submersible racks are molded of a special blend of autoclavable polypropylene. They will sink in a water bath and maintain their stability even in agitated water. No-Wire™ racks are also perfect for use outside the water bath, and meet the exacting needs of daily usage in the lab. Supplied in numerous hole sizes, the racks are available in three colors for safety and identification in the lab.