Timers

Photo of Professional Mechanical Timers
These professional mechanical timers are available with a 0-30 or 0-60 minute timing interval. Easy operation. Clear bell-tone signals at end of pre-set time. Marktime.
Photo of Control Company 1021 Traceable® 12-Channel 100-Hour Alarm Bench Timer

The Traceable® Bench Timer has a range of 0.001 second to 999 hours. Precise timing and an eight-digit, 1/2-inch-high, bright-intensity LED display make it the choice for all industrial and biomedical tests. Reads in four different formats: 99 hours, 59 minutes, 59 seconds, 99 hundredths; 99999.999 seconds; 9999.9999 minutes; and 999.99999 hours. Ultra-high stability and sealed quartz-crystal provide precision timing immune to AC line fluctuations. If the power fails, a 9-volt backup battery continues timing until power is restored.

Photo of Control Company 1060 Traceable® 1-Hour Pocket Timer

The four-digit LCD display always shows the time remaining in hours and minutes. Program it in 1-minute increments from 20 hours to 1 minute. At zero, a beeping alarm sounds for 60 seconds or may be silenced manually. In the stopwatch mode, it times from 1 second to 20 minutes and then rolls over. Also has a timeout feature in both up and down counting. Digits are 1/3-inch-high for ease in viewing. Three-button operation is fast. Resolution is 1 minute and quartz-crystal accuracy is 0.01%.

Photo of Control Company 1062 60-Minute Mechanical Interval Timer

This Timer is adjustable from 1 to 60 minutes in 1-minute increments. Setting pointer to desired interval winds the time automatically. The bell sounds at end of cycle. Indicating pointer always shows exact time remaining on easy-to-read numerals. Case is chemical resistant. Case is 3- 3/4 x 3-3/4 x 2 inches.

Photo of Control Company 1221 Traceable® Digital Bench Timer 10-Hour

The perfect size—has a large-screen LCD and a small, lab-bench footprint. Times up from 0.01 second to 9 hours, 59 minutes, 59 seconds, and 99 hundredths of a second. Switchable between cumulative and interval-split, the unit also allows an infinite number of time-outs. Oversize buttons make it easy to use. Three 4mm sockets (and supplied test leads) allow external triggering of the START/STOP and SPLIT/LAP/RESET functions of the timer. Digital display is 3/4-inch-high and is readable from 10 feet.

Photo of Control Company 5006 Traceable® Two-Memory Timer

Count on Two-Memory Timer to deliver on-the-dot timing operations whether counting up or down from 23 hours, 59 minutes, 59 seconds. Features a timing accuracy of 0.01% and a 1-second resolution. It’s also a time-of-day clock with user-selectable AM/PM or 24-hour format. A smooth, streamlined design and two-tone face make Two-Memory Timer an attractive companion for any lab bench. Bright LCD digits are 3/8-inch-high for easy viewing. To perform two tests at once, both countdown timing channels may be started simultaneously.

Photo of Control Company 5040 Traceable® 100-Hour 4-Channel Timer

Reduce uncertainty in your life—own our friendliest timer. Counts down, alarms, times up, and tells time-of-day with uncompromising precision. But it’s also very user-friendly. Innovative 100-Hour Timer fulfills virtually every lab timing requirement. Multi-channels time down, time up, and tell time-of-day. It’s the workhorse of the lab. Timer operates on all channels simultaneously. It has five countdown channels, a stopwatch channel, and a time-of-day channel. Counts both up and down to 99 hours, 59 minutes, 59 seconds. Accuracy is 0.01%.

Photo of Control Company 5122 Traceable® Instant-Recall Memory Timer

Input a time and the instant memory always returns the display to the programmed time. This is the ideal timer to dedicate to a routinely timed test. Bright, extra-large, 5/8-inch-high digits count down at any set time from 99 minutes 59 seconds to zero. At zero a loud 30-second alarm sounds. Designed specifically for routine tests, quality control requirements, and repetitive analysis, it is the lab workhorse. The unique memory feature encourages devoting this timer to one piece of laboratory equipment such as a water bath, oven, stirrer, or incubator. Accuracy is 0.01%.

Photo of Control Company 5028 Traceable® Jumbo Digit 99M/59S Timer™

Timer counts down from 99 minutes, 59 seconds in second increments with 3- button ease and big-digit visibility. Automatic memory resets the display to the last programmed time—ideal for repetitive tests. Quartz-crystal accuracy is 0.01%. To assure accuracy an individually serial- numbered Traceable® Certificate is provided from the manufacturer’s ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Three-quarter-inch-high digits are readable from 20 feet. Alarm sounds for 30 seconds.

Photo of Control Company 5026 Traceable® 20-Hour QC Timer™

Ideal QC (quality control) countdown and alarm timer combines easy, 3- button operation with giant-size digits. Learn its operation in less than 10 seconds without ever opening the directions. Quartz-crystal accuracy is 0.01%. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer’s ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).

Photo of Control Company 5015 Traceable® Talking Timer

Innovative countdown timer talks. It counts down, talks, times up, and tells time-of-day with Traceable® precision. Never again glance at your timer. During countdown, voice reporting frequency is every hour until 1 hour is reached, every 10 minutes until 10 minutes is reached, every minute until 1 minute is reached, every 10 seconds until 10 seconds remain, then every second. Also announces elapsed time since alarming. Counts both up (stopwatch) and down from 23 hours, 59 minutes, 59 seconds. Resolution is 1 second. Quartz-crystal accuracy is 0.01%.

Photo of Control Company 5012 Traceable® Multi-Colored™ Timer

Add color to your lab, 4-Channel Multi-Colored™ Timer, personalize your timer, show your distinct style with customized bold colors—a fresh look for the lab. Three, bright, colorful distinct supplied frames permit personalization of timer. Countdown and alarms on 4 channels, and counts up during alarming indicating elapsed time since alarming. Automatic Bounceback™ Memory for repetitive timing. Times up and down from 99 hours, 59 minutes, and 59 seconds. Resolution is 1 second. Accuracy is 0.01%. Time- of-day clock (12/24 hour).

Photo of Control Company 5011 Traceable® GIANT-DIGIT™ Countdown Timer

View giant size digits on your bench timer from across the lab. Visible from shelves, in hoods, or perched on instruments. Eliminates squinting to observe alarm time remaining. Giant-Digits™ with 11/3 inch digit height are viewable from 50 feet. Counts down and alarms on single channel for easy use, and counts up during alarming indicating elapsed time since alarming. A three-button intuitive operation eliminates reading instructions. Traceable® Timer has Automatic Bounceback™ Memory for repetitive timing. Timing range is 99 minutes, and 59 seconds. Resolution is 1 second.

Photo of Control Company 5043 Traceable® Tie Timer™

Wear this countdown timer around your neck. Know at a glance the time remaining with this never-missing timer on a 36-inch lanyard. Extraordinarily lightweight, it’s less than an ounce. Digits (1/2-inch- high) are readable even with your glasses off. Program it to count down and alarm from 24 hours to 1 second. Resolution is 1 second and accuracy is 0.01%. Touch-of-a-button operation permits instant-replay timing for repetitive testing. Memory never changes until you reprogram it. This feature is a real time-saver. Also has a stopwatch (count-up) and time-of- day display.

Photo of Control Company 5045 Traceable® Digital Timer Plus™

The handiest timer ever designed clips to your lab coat, belt, notebook, clipboard, or anywhere. You’ll never lose your own personal timer. Six- digit LCD display always shows the time remaining in hours, minutes, and seconds. Program it in the countdown mode, in 1 second increments, from 100 hours to 1 second. At zero, a loud-beeping alarm sounds for 60 seconds or may be silenced manually. In the stopwatch mode, it times from 1 second to 99 hours and then repeats. Also has a time-out feature in both up and down counting.

Photo of Control Company 5046 Traceable® Clip-It™ Timer

Clip-It™ Timer counts down, alarms, and functions as a stopwatch. The timer is designed so it clips to your lab coat, belt, notebook, clipboard, or anywhere. Six-digit LCD display always shows the time remaining in hours, minutes, and seconds. Program it in the countdown mode, in 1 second increments, from 100 hours to 1 second. At zero, a loud-beeping alarm sounds for 60 seconds or may be silenced manually. In the stopwatch mode, it times from 1 second to 99 hours and then repeats. Also has a time-out feature in both up and down counting.

Photo of Control Company 5133 Traceable® Visual Alarm Timer

Timer counts down from 9999 minutes in minute increments and has a countdown resolution of 1 second for times under 99 minutes. With the flip of a switch, select either an audible alarm, or bright flashing LED visual alarm. Automatic memory resets the display to the last programmed time—ideal for repetitive tests. Thru-zero feature allows counting down, alarming, then counting up. To assure accuracy an individually serial- numbered Traceable® Certificate is provided from the manufacturer’s ISO 17025 calibration laboratory accredited by A2LA.

Photo of Control Company 5132 Traceable® Nano Timer

Small timer— large display At the press of a button, timer displays countdown alarm time/stopwatch (count-up) time, and time-of-day (AM/PM and 24-hour format). Accuracy is 0.01%. High-decibel alarm sounds for 1 minute. Count down or up to 23 hours, 59 minutes, 59 seconds on the two timing channels. For repetitive tests, the unit’s two channel memory automatically returns the display to the original programmed time. Three-eighths-inch-high digits may be read from 10 feet.

Photo of Control Company 5050 Traceable® Time Switch Controller

Program up to 196 switchings per week. An always-remember memory permits programming 14 different switchings per day, which may be allocated over four separate weekly programs for up to 196 switchings per week. Schedule an entire week with the press of a few buttons. Turn equipment on today and off a week later. The controller will turn equipment on and off in intervals as short as 1 minute or as long as 168 hours. The day programs allow repeating the same cycle every day of the week, weekdays only, weekends only, or any selected day.

Photo of Traceable® Touch Timer™
Photo of Traceable® Touch Timer™

Four-digit LCD display may be programmed to count down and alarm from 19 hours, 59 minutes to 1 minute in any minute increment. Two-button operation makes it extremely easy to use. Loud-beeping alarm may be silenced manually or turns off automatically after 20 seconds. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer’s ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).