Count Down Timers
Control Company 5028 Traceable® Jumbo Digit 99M/59S Timer™
Timer counts down from 99 minutes, 59 seconds in second increments with 3- button ease and big-digit visibility. Automatic memory resets the display to the last programmed time—ideal for repetitive tests. Quartz-crystal accuracy is 0.01%. To assure accuracy an individually serial- numbered Traceable® Certificate is provided from the manufacturer’s ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Three-quarter-inch-high digits are readable from 20 feet. Alarm sounds for 30 seconds.
Catalog No.: CON5028
Control Company 5026 Traceable® 20-Hour QC Timer™
Ideal QC (quality control) countdown and alarm timer combines easy, 3- button operation with giant-size digits. Learn its operation in less than 10 seconds without ever opening the directions. Quartz-crystal accuracy is 0.01%. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer’s ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Documentation provides the accurate timing assurance demanded by government regulations, ISO 9000 req
Catalog No.: CON5026
Control Company 5043 Traceable® Tie Timer™
Wear this countdown timer around your neck. Know at a glance the time remaining with this never-missing timer on a 36-inch lanyard. Extraordinarily lightweight, it’s less than an ounce. Digits (1/2-inch- high) are readable even with your glasses off. Program it to count down and alarm from 24 hours to 1 second. Resolution is 1 second and accuracy is 0.01%. Touch-of-a-button operation permits instant-replay timing for repetitive testing. Memory never changes until you reprogram it. This feature is a real time-saver. Also has a stopwatch (count-up) and time-of- day display. To assure accuracy
Catalog No.: CON5043
Control Company 5046 Traceable® Clip-It™ Timer
Clip-It™ Timer counts down, alarms, and functions as a stopwatch. The timer is designed so it clips to your lab coat, belt, notebook, clipboard, or anywhere. Six-digit LCD display always shows the time remaining in hours, minutes, and seconds. Program it in the countdown mode, in 1 second increments, from 100 hours to 1 second. At zero, a loud-beeping alarm sounds for 60 seconds or may be silenced manually. In the stopwatch mode, it times from 1 second to 99 hours and then repeats. Also has a time-out feature in both up and down counting. Notifies you when to read a color change, remove a sa
Catalog No.: CON5046
Control Company 5132 Traceable® Nano Timer
Small timer— large display At the press of a button, timer displays countdown alarm time/stopwatch (count-up) time, and time-of-day (AM/PM and 24-hour format). Accuracy is 0.01%. High-decibel alarm sounds for 1 minute. Count down or up to 23 hours, 59 minutes, 59 seconds on the two timing channels. For repetitive tests, the unit’s two channel memory automatically returns the display to the original programmed time. Three-eighths-inch-high digits may be read from 10 feet. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer’s ISO 170
Catalog No.: CON5132
Traceable® Touch Timer™
Four-digit LCD display may be programmed to count down and alarm from 19 hours, 59 minutes to 1 minute in any minute increment. Two-button operation makes it extremely easy to use. Loud-beeping alarm may be silenced manually or turns off automatically after 20 seconds. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer’s ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Handy, postage stamp size is designed to be used an
Catalog No.: CON5047