Thermolyne (Thermo Scientific Inc.)
Thermolyne's Controlled Atmosphere Furnaces are ideally suited for coal and coke ashing procedures. Two popular sizes to choose from. They also meet ASTM D3174 specifications: 3-4 air exchanges per minute. Heating rate of 8°C/min.- 500°C, 6°C/min. from 500°C to 750°C. Holds at 750 °C for two hours, then turns off. Choose from 3 temperature control models. B1: Digital single set point control with a single ramp to set point and a dwell. A single display shows actual temperature or set point. The furnaces that use this control also utilize a mechanical Over Temperature...Catalog No.: F5230-1 | F5230-2 | F5230-3 | F5230-4 | F5230-5 | F5230-7 | | F5230-9 | F5230-10
This large chamber muffle furnace has heating elements that are located on top, bottom and sides of chamber for enhanced temperature uniformity. Triple the usable working area with two supplied accessory refractory shelves. Two built-in vent ports remove undesirable contaminants and moisture; extending the life span of the element and unit. The rear of the chamber incorporates a 0.38" (0.95 cm) diameter port for monitoring chamber temperatures with independent measuring devices. Critical electronic components and heating elements are protected by a 35-amp circuit breaker. Door safety switch...Catalog No.: F5225-1 | F5225-2A | F5225-3 | F5225-5 |
Heating elements are located on top, bottom, and sides of chamber for enhanced temperature uniformity. Built-in venting system removes undesirable contaminants and moisture; extends the life span of the element and unit. The rear of the chamber incorporates a 0.38" (0.95 cm) diameter port for monitoring chamber temperatures with independent measuring devices. Optional stainless steel shelf doubles load capacity (maximum temperature of 900°C). Door safety switch protects operator by removing power to the heating elements upon opening the door. Thermocouple break protection cuts power to...Catalog No.: F5205-1AE | F5205-1 | F5205-2BA | F5205-2BE | F5205-2B | F5205-2CA | F5205-2CE | F5205-2C | F5205-3DA | F5205-3DE | F5205-3D | | F5205-6 | F5205-7
The Thermo Scientific Thermolyne Benchtop Muffle Furnace is ideal for general laboratory use, including gravimetric analysis, sintering, quantitative analysis and heat treating. It reaches a 1200°C maximum temperature and is available in two capacities for added flexibility. The built-in vent port removes contaminants and moisture to extend the life of the heating element and furnace. Open coil heating elements on both sides of chamber assure fast heat-up, with minimum temperature gradient. Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient ceramic...Catalog No.: F5160-1 | F5160-2 | F5160-3 | F5160-4 | F5160-5 | F5160-6 | F5160-7 | F5160-8 | F5160-9 | F5160-10 | F5160-11 | F5160-12 | F5160-13 | F5160-14 | | F5160-16 | F5160-17 | F5160-18 | F5160-19 | F5160-20 | F5160-21 | F5160-24 | F5160-25 | F5160-26
These industrial benchtop muffle furnaces have heavy-duty firebrick insulation that surrounds the chamber opening for added durability. Embedded elements in special refractory cement permit excellent heat distribution in the chamber. Adjustable Alarm or Over Temperature Protection (OTP) setting can be used to protect the furnace or loaded chamber from excessive heat. Thermocouple break protection cuts power to the heating elements, prevents a thermocouple failure runaway condition. Choose from two control options: B1: Digital single set point control with a single ramp to set...Catalog No.: F5150-1 | F5150-2 | F5150-3 | F5150-4 | | F5150-6
These small Thermolyne muffle furnaces come with the A1 control package (Digital single set point control. A single display shows actual temperature or set point.). Ceramic fiber insulation permits faster heat-up, reduces energy consumption. Embedded heating element on top and both sides improves temperature uniformity. Thermocouple break protection cuts power to heating elements, prevents a thermocouple failure runaway condition. Door safety switch protects operator by removing power to heating elements upon opening the door. The rear of the chamber incorporates a 0.38" (0.95 cm) diameter...Catalog No.: F5140-3 | F5140-3E | F5140-4 | F5140-4E | F5140-5 | F5140-6
Stay within the budget of your lab, clinic or classroom by using Thermo Scientific™ Aluminum-Top Hotplates. These durable hotplates are equipped with thermostatic temperature control to maintain uniform temperature across the aluminum plate surface.
- Uniform temperature (±2.4°C at 100°C)
- Maximum operating temperature: 700°F (371°C)
- Baffle-vented welded stainless-steel case
- Cast-aluminum top for maximum heat transfer, strength and corrosion resistance
- Recommended for use with glass vessels only
- 3 year...
The Thermo Scientific 2200 series of aluminum top hot plates outperform other top materials providing superior temperature uniformity and stability. Thermostatic temperature control senses and maintains hot plate temperature, provides excellent stability. Embedded heating elements transfer heat evenly to top plate, provides uniform temperature. Cycle light indicates when power is being supplied to heating element. Stainless steel case provides optimal strength for heavy loads. 12 x 24" hot plate case is painted with epoxy paint for increased chemical resistance in corrosive environments....Catalog No.: H2100-1 | H2100-1E | H2100-2 | H2100-2E
Enable uniform heating of large volumes and multiple vessels using Thermo Scientific™ External-Controlled Hotplates. These hotplates are ideal for a range of applications with acidic or basic aqueous solutions. An external controller operates outside fume hoods and corrosive environment. Recommended for use with glass vessels only.
- Isolation of controls allows operation in hazardous environments
- Large 12 x 12″ (30.5 x 30.5cm) and 12 x 24″ (30.5 x 60.9cm) top plate surfaces accommodate up to 40 lb. (18.1kg) loads
- Power light indicates...
Save space with the compact design of Thermo Scientific™ Nuova™ Hotplates. These hotplates provide excellent temperature uniformity and have a corrosion-resistant top. Excellent low end temperature control ideal for warming applications. Temperature Range: 100° to 700°F (38° to 371°C)....
The MaxiMix™ III Vortex Mixer can perform the functions of four separate apparatuses and save valuable bench space. Unit features four interchangeable mixing and shaking accessories for large volume mixing, variable speed control, and continuous, trouble-free shaking. Depending on the application, use the foam pad, universal holder, utility tray or flask holder. Ships with one soft foam rubber pad (PT500X6A). All other accessories must be purchase separately.
- Precise matching of an electronic speed control to a high torque DC type motor provides...
Maxi Mix® I Vortex Mixers mix quickly and evenly in continuous operation or touch-on mode. They are ideal for enzymatic and RIA assays, general test tube mixing, biochemical assays, viral dilutions preparations, precipitated assays, cell suspension vortexing and tissue sample mixing. This mixer is excellent for single and multiple tubes and small flasks with closed tops.
- Simultaneously mixes up to four test tubes
- Push-button top-mounted ON/OFF switch
- Vary vortex mixing by simply changing pressure of tube against foam rubber top ...
The low-profile Thermo Scientific LP Vortex Mixers allow you to choose to continuously mix or pulse samples. Low-profile design with small footprint easily stores away when not in use.
- Choose between continuous or pulse mode
- Simple dial controls speed from 0 to 3000 rpm
- Automatic overload shutoff
- Sturdy design and weight keeps unit from "walking" while in use
- Variety of accessories accommodates different-sized vessels
(Sample Photo Displayed. Individual items may differ from the image...
Obtain uniform specimen suspension with the smooth rocking action of Thermo Scientific™ Vari-Mix™ and Speci-Mix™ Test Tube Rockers. Compact and precision-controlled platform mixers, all models hold 10 to 30mm diameter tubes and are ideal for blood collection tubes.
- Choose from fixed or adjustable speeds
- Reversible pad provides one side (with lip to prevent sliding) for capped tubes 110mm (4.33″) long; other side for longer tubes
- Autoclavable white silicone rubber pad enhances viewing
- Can be used in a noncondensing incubator or...
Cimarec+ stirring hot plates are ideal for academic and research institutions desiring reliable, safe, and easy operation. The hot top indicator remains lit as long as the plate temperature is above 50°C, even if the hot plate is turned off. Temperature is adjustable in one degree increments, allowing you to control the temperature more accurately. Optional external temperature probe (order separately) provides the feedback necessary to keep your sample at the desired temperature. Optional splash guard (order separately) protects you and your sample from mishaps. Optional rod and clamps (...Catalog No.: S5705-1 | S5705-1E | S5705-2 | S5705-2E | S5705-3 | S5705-3E
Thermo Scientific™ Nuova™ Stirring Hotplates are capable of warming applications that require stir speeds as low as 100 rpm as well as delivering full stirring and heating capabilities. Featuring a compact design, low temperature stability and corrosion-resistant top for a wide range of warming applications, these hotplates reach maximum temperature in just 8 minutes. Embedded heating element ensures even heat distribution. Temperature Range: 100° to 700°F (...Catalog No.: S5740-1 | S5740-1E | S5740-2
Thermo Scientific™ Cimarec+™ series digital magnetic stirrers offer precise stirring control for your routine protocols.
- Stir-Trac features innovative engineering for slow-speed stirring, consistent speed control, and strong magnetic coupling
- Top plate choices in ceramic or aluminum
- Easy-to-read LED display for stirring
- Raised display design protects electronics from spills
- Optional splash guard protection shield
- Variable sizes for different sample volumes
(Sample Photo Displayed....Catalog No.: S5545-1 | S5545-1E | S5545-2 | S5545-2E | S5545-3 | S5545-3E | S5546-1 | S5546-1E
Thermo Scientific™ Nuova™ Magnetic Stirrers save space with their low profile and feature a porcelain-coated top plate for chemical resistance. An excellent choice for low speed stirring, they are ideal for culture media preparation and slow speed stirring of culture media. Recommended for use with glass vessels only. Stirring Speed: 100 to 1,000 rpm.
- Die cast aluminum case provides durability
- Excellent low speed stirring (100rpm) can be achieved by turning the control knob...
Deliver the highest protection for hazardous applications, including Class I, Group D flammable gases or solvent vapors. These hotplates feature overtemperature safety monitors, precise thermostatic controls and sealed aluminum housing for hazardous applications. Recommended for recrystallizations utilizing organic solvents and also to Dry/Heat-treat silicon wafers.
- Thermostatic safety is set at 243°C (469.4°F) for added protection
- Maintains temperature within ±5.5°C (9.9°F)
- Cast aluminum top plate maximizes heat transfer and uniformity...
Perforated steel case on this Thermolyne stirrer provides cool operation. Strong magnetic coupling keeps stir bar synchronized. Stirring motor is designed for continuous hours of operation. Stirring speed range is 100 to 1,000 rpm. 120V.Catalog No.: S5538