LPG Testing

For copper strip corrosion test on liquefied petroleum gases. ASTM D-1838, also GPA Method as per Bulletin 2140. MGM Model 46C. Cylinder is made entirely of polished stainless steel, with O-ring seal for hand tightening. Each cylinder is tested at 3000 PSI. Equipped with two stainless steel needle valves with O-ring packing and ¼" NPT male pipe thread to accommodate...

LPG Copper Corrosion Test Cylinder, Stainless Steel Replacement Nut Only. MGM 46C-2.

LPG Copper Corrosion Test Cylinder, Stainless Steel Replacement Tube Only. MGM 46C-4.

LPG Copper Corrosion Test Cylinder, Replacement SS Needle Valve, 19A/SS. MGM 46C-6

The L-K Industries E-4-12-TH LP Gas Corrosion Test Cylinder Heater is used to prepare samples for the ASTM and NGPA copper strip corrosion testing of liquefied petroleum gas (LPG). All units are certified for Class I, Division 2 Groups A, B, C and D Hazardous and Ordinary Locations. Due to these certifications, the unit requires hard-wiring. It is designed specially to pair...

Model AT-1000. A specially constructed and calibrated valve manufactured solely for this test. The valve has two open positions, a wide open position for flushing and a small preset flow position for testing. ASTM D-2713-76 and GPA Standard 2140-80. Furnished with carrying case but without needed stopwatch, sample cylinder having minimum capacity of 3 gal. and clean, dry...

Service Kit – Consists of Screen, Gasket, Compression Spring, Filter Element w/Gasket, Internal Retaining Ring, Housing O-Ring, & Set Screw for Model AT-1000. A specially constructed and calibrated valve manufactured solely for this test. The valve has two open positions, a wide open position for flushing and a small preset flow position for testing. ASTM D-2713-76...

Model AT-1000. A specially constructed and calibrated valve manufactured solely for this test. The valve has two open positions, a wide open position for flushing and a small preset flow position for testing. ASTM D-2713-76 and GPA Standard 2140-80. Furnished with carrying case but without needed stopwatch, sample cylinder having minimum capacity of 3 gal. and clean, dry...

Model AT-1000. A specially constructed and calibrated valve manufactured solely for this test. The valve has two open positions, a wide open position for flushing and a small preset flow position for testing. ASTM D-2713-76 and GPA Standard 2140-80. Furnished with carrying case but without needed stopwatch, sample cylinder having minimum capacity of 3 gal. and clean, dry...

Model AT-1000. A specially constructed and calibrated valve manufactured solely for this test. The valve has two open positions, a wide open position for flushing and a small preset flow position for testing. ASTM D-2713-76 and GPA Standard 2140-80. Furnished with carrying case but without needed stopwatch, sample cylinder having minimum capacity of 3 gal. and clean, dry...