Tanks

Photo of Nalgene 54100 Lightweight Graduated Cylindrical Tank with Cover-LLDPE

Nalgene 54100 Lightweight Graduated Cylindrical Tank with Cover-LLDPE. ALL SIZES

Nalgene 54100 Lightweight Graduated LLDPE Cylindrical Tanks with Cover are ideal for less rigorous applications. These linear, low-density polyethylene tanks offer excellent resistance to stress cracking. The cover features an external flange that extends beyond the rim when used as a liner for steel drums. 55-gal. size can be used as liner for steel drums. Approximate wall thickness, 0.09″ (2.4mm). Not autoclavable. Note: Tanks used at elevated temperatures or with high specific gravity liquids should be externally supported.

Polly-Crocks with Lids

Heavy-duty, rotational molded polyethylene tanks will safely hold chemicals and hot liquids up to 52°C (125°F) and will meet FDA requirements for food handling. The open-top tanks are stress-free and self-supporting with a seamless wall about 4.8 mm (3/16") thick. Resistant to rust, corrosion and dents, each container's capacity is marked on both the tank and the lid. Lids have a central grip knob for easy removal and replacement. Available with or without a faucet. Polly-Crocks are also offered with a sight glass as a special order.

H/D Rectangular Tanks with Lids

Seamless, rotational-molded polyethylene tanks are lightweight and easy to handle. Available with or without a faucet, these tanks are resistant to most acids and all alkalies. All sizes are made with wide top flanges, include covers, and can be supplied with spigots, fittings, dams, partitions, etc. Contact us for quotations on special sizes and fabrication in polypropylene and PVC.

Photo of Nalgene 54102 Lightweight Cylindrical HDPE Tank with Cover and Spigot

Nalgene 54102 Lightweight Cylindrical HDPE Tank with Cover and Spigot. ALL SIZES

Nalgene 54102 Graduated Lightweight Cylindrical Tanks with Cover and Spigot are an economical alternative to stainless steel. This Lightweight Cylindrical LLDPE Tank offers excellent resistance to stress cracking and features a spigot installed for draw off. Ideal for less rigorous applications. Approximate wall thickness: 3/32″ (2.4mm). Equipped with Nalgene Needle Spigot (Cat. No. 96423) for dispensing. Not autoclavable.

(Sample Photo Displayed. Individual items may differ from the image shown.)

Photo of Nalgene 11200 Cylindrical Polypropylene Tanks with Cover

Nalgene 11200 Cylindrical Polypropylene Tanks with Cover. ALL SIZES

Nalgene 11200 Cylindrical Polypropylene Tanks with Cover offer good resistance to stress cracking and tolerant of many organic chemicals. These polypropylene tanks can be autoclaved. Very versatile at a much lower cost that stainless steel tanks. Tanks come with cover and can be modified with factory-installed spigots.

(Sample Photo Displayed. Individual items may differ from the image shown.)

Photo of Nalgene 11102 Heavy-Duty Cylindrical Graduated HDPE Tanks with Spigot and Cover

Nalgene 11102 Heavy-Duty Cylindrical Graduated HDPE Tanks with Spigot and Cover. ALL SIZES

Nalgene 11102 Heavy-Duty Cylindrical Graduated HDPE Tanks with Spigots. Impact and abrasion-resistant, these tanks with spigots can withstand most acid, alcohols and bases. Needle Type Tank Spigot (Cat. No. 6421) installed to allow draw off. Spigot accepts 5/8" I.D. tubing. Not autoclavable.

(Sample Photo Displayed. Individual items may differ from the image shown.)

Photo of Nalgene 2650 Closed-Dome Bio Tanks-Polypropylene

Nalgene 2650 Closed-Dome Bio Tanks-Polypropylene. ALL SIZES

Store, mix and dispense reagents in Nalgene 2650 Closed-Dome Polypropylene Tanks, designed for use as closed containment systems. Offered in sizes ranging from 75 to 380L, tanks featurea a 150mm neck opening fitted with a gasketed closure for secure sealing. Tanks may be fitted with spigots. Autoclavable tanks and closures feature polypropylene construction. Use with Closed-Dome Tank Closure w/ Mixer Support Assembly (Mfr. No. 2651-0200), BioTech Overhead Mixer (Mfr. No. 2653-0010 and 2653-0020) and Lower Assemblies for BioTech Mixers (Mfr. No.

Photo of Nalgene 14200 Rectangular Tank with Cover-Polypropylene

Nalgene 14200 Rectangular Tank with Cover-Polypropylene. ALL SIZES

Nalgene 14200 Rectangular Polypropylene Tanks with Cover significantly reduce evaporation and contamination. Available in sizes ranging from 8 to 114L. Tanks can be modified with a factory-installed spigot. Suitable for use with many organic chemicals. These tanks offer good stress-crack resistance and are autoclavable. NOTE: Tanks used at elevated temperatures or with high specific-gravity liquids should be externally supported.

(Sample Photo Displayed. Individual items may differ from the image shown.)

Photo of Nalgene 14100 Heavy-Duty Rectangular Tanks with Cover-LLDPE

Nalgene 14100 Heavy-Duty Rectangular Tanks with Cover-LLDPE. ALL SIZES

Nalgene 14100 Heavy-Duty Rectangular LLDPE Tanks with Cover will resist most acids, alcohols and bases, plus it is impact and abrasion resistant. Very versatile at a much lower cost than stainless steel tanks. Molded as one piece, no seams. Nominal wall thickness is 5/32″ (3.97mm). Stepped flange at top provides reinforcement and grip for lifting. Tanks come with cover and can be modified with factory-installed spigot. Do not autoclave.

(Sample Photo Displayed. Individual items may differ from the image shown.)

Photo of Nalgene 11100 Heavy-Duty Graduated Cylindrical Tanks with Cover-LLDPE

Nalgene 11100 Heavy-Duty Graduated Cylindrical Tanks with Cover-LLDPE. ALL SIZES

Nalgene 11100 Heavy-Duty Graduated Cylindrical LLDPE Tanks with Cover are rigid tanks with a hard surface that offers good temperature tolerance. Available in sizes ranging from 19L to 757L and include covers to signficantly reduce evaporation and contamination. Sizes up to 378L available with factory-installed spigots. Do not autoclave.

(Sample Photo Displayed. Individual items may differ from the image shown.)